產品介紹
首頁 > 產品介紹 > 交直流電源 > 直流電源供應器
直流電源供應器
功能說明
Sorensen XFR Series
2.8 kilowatt DC power supply ideal for applications where high power and a wide adjustment of output voltage or current is required
Product Overview
XFR is the smart choice for research, product development and production test applications such as R&D, magnet control, product design, ATE, process control, electroplating and burn-in. The unique features of XFR make it the best choice for applications where high power and a wide adjustment of output voltage or current are required in a full 19-inch rack package. Choose from ten 2800-watt models.
Zero voltage, or "soft" switching, provides significant benefits. Switching transients are virtually eliminated and noise performance is closer to linear levels. Efficiency is increased, heat generation is decreased, and stress on the switching transistors is reduced - improving reliability (MTBF). Unlike most competitive products, XFR generates full power at full rated current over its total operating range of 0 to 50° C without derating. XFR is also designed with excellent thermal management, so units can be stacked in rack mounts without leaving ventilation space between each unit.
Features And Benefits
- Analog Programming
- Constant Voltage or Constant Current Operation
- LabView® and LabWindows® Drivers
- Standby Mode
- Front Panel Button Preview of Voltage, Current, OVP
- CE, CSA, UL Approvals
規格說明
| Common | |||
| Switching Frequency | XFR 2.8 kW : Nominal 31 kHz ( 62 kHz output ripple ); 60 V to 600 V models : nominal 62.5 kHz ( 125 kHz output ripple ). | ||
| Time Delay | 7 sec maximum from power on until output stable | ||
| Voltage Mode Transient Response Time | < 3 ms for output voltage to recover within 0.5% of its rated voltage after a step change in load current of up to 10% to 90% of rated output | ||
| Maximum Voltage Differential | ±600 Vdc from output to safety ground | ||
| Remote Start/Stop and Interlock | 2.5-15 V signal or TTL-compatible input, selectable logic | ||
| Remote Analog Programming | Voltage and current programming inputs ( source must be isolated ) : 0-5 k, 0-10 k resistances; 0-5 V, 0-10 V ( default ) voltage sources | ||
| Remote Analog Monitoring | Voltage and current monitor outputs 0-5 V, 0-10 V ( default ) ranges for 0-100% of output | ||
| Remote Programming & Monitoring Accuracy | 1% zero to full scale output for the default range | ||
| Maximum Remote Sense Line Drop Compensation | 5 V / line ( Line drop is subtracted from total voltage available at supply output. ) | ||
| Front Panel Voltage and Current Control | 10-turn voltage and current potentiometers | ||
| Front Panel Voltage Control Resolution | 0.02% of maximum voltage | ||
| Main Output Connector | XFR 2.8 kW : 7.5 - 100 V models : nickel-plated copper bus bars with bus bar cover and strain relief; 150V to 600 V models : 4-terminal, wire clamp connector with cover and strain relief | ||
| Approvals | NRTL approved and CE-marked to UL Std. No. 61010-1, CAN / CSA-C22.2 No. 61010-1-04, EN 610101-1 ( Equipment Class I, Pollution Degree 2, Installation Category II ) Meets USA EMC standard: FCC, part 15B, Class A; Meets Canadian EMC standard : ICES-001, Class A. | ||
| Input | |||
| Input Voltage Ranges | XFR 2.8 kW : 190-264 Vac, 1φ ( 24.3 A @ 208 Vac; 20.5 A @ 230 Vac typical ), 47-63 Hz; Option : M2 3φ 208 Vac input | ||
| AC Input Connector | Type 3-terminal, 34 A, 250 V, wire clamp connector with strain relief cover | ||
| Protection Features | |||
| Over-voltage protection | |||
| Over-temperature protection | |||
| Environmental | |||
| Operating Temperature | XFR 2.8 kW : 0 to 50°C, | ||
| Storage Temperature | -20°C to 70°C | ||
| Humidity ( Non-condensing ) |
Up to 90% RH, non-condensing | ||
| Physical | |||
| Model | XFR 2.8 kW | ||
| Dimensions | Width : 19” ( 429.4 mm ) Height : 3.5” ( 88.9 mm ) Depth : 21” ( 533.5 mm ) |
||
| Weight | 33 lb ( 15 kg ) | ||
| Output Ratings | |||
| Model | Output Voltage | Output Current | Output Power |
| XFR 7.5-300 | 0-7.5 V | 0-300 A | 2250 W |
| XFR 12-220 | 0-12 V | 0-220 A | 2640 W |
| XFR 20-130 | 0-20 V | 0-130 A | 2600 W |
| XFR 33-85 | 0-33 V | 0-85 A | 2805 W |
| XFR 40-70 | 0-40 V | 0-70 A | 2800 W |
| XFR 60-46 | 0-60 V | 0-46 A | 2760 W |
| XFR 100-28 | 0-100 V | 0-28 A | 2800 W |
| XFR 150-18 | 0-150 V | 0-18 A | 2700 W |
| XFR 300-9 | 0-300 V | 0-9 A | 2700 W |
| XFR 600-4 | 0-600 V | 0-4 A | 2400 W |
| Line Regulation | ||
| Model | Voltage | Current |
| XFR 7.5-300 | 2.75 mV | 32 mA |
| XFR 12-220 | 3.2 mV | 24 mA |
| XFR 20-130 | 4 mV | 15 mA |
| XFR 33-85 | 5.3 mV | 10.5 mA |
| XFR 40-70 | 6 mV | 9 mA |
| XFR 60-46 | 8 mV | 6.6 mA |
| XFR 100-28 | 12 mV | 4.8 mA |
| XFR 150-18 | 17 mV | 3.8 mA |
| XFR 300-9 | 32 mV | 2.9 mA |
| XFR 600-4 | 62 mV | 2.4 mA |
| Load Regulation | ||
| Model | Voltage | Current |
| XFR 7.5-300 | 6.5 mV | 65 mA |
| XFR 12-220 | 7.4 mV | 49 mA |
| XFR 20-130 | 9 mV | 31 mA |
| XFR 33-85 | 11.6 mV | 22 mA |
| XFR 40-70 | 13 mV | 19 mA |
| XFR 60-46 | 17 mV | 14.2 mA |
| XFR 100-28 | 27 mV | 10.6 mA |
| XFR 150-18 | 35 mV | 8.6 mA |
| XFR 300-9 | 65 mV | 6.8 mA |
| XFR 600-4 | 125 mV | 5.8 mA |
| Meter Accuracy | ||
| Model | Voltage ( 1% of Vmax + 1 count ) | Current ( 1% of lmax + 1 count ) |
| XFR 7.5-300 | 0.09 V | 4 A |
| XFR 12-220 | 0.13 V | 2.3 A |
| XFR 20-130 | 0.3 V | 1.4 A |
| XFR 33-85 | 0.43 V | 0.95 A |
| XFR 40-70 | 0.5 V | 0.8 A |
| XFR 60-46 | 0.7 V | 0.56 A |
| XFR 100-28 | 1.1 V | 0.38 A |
| XFR 150-18 | 1.6 V | 0.19 A |
| XFR 300-9 | 4 V | 0.1 A |
| XFR 600-4 | 7 V | 0.05 A |
| Output Ratings | |||
| Model | Output Noise ( 0-20 MHz ) |
Output Ripple ( rms ) | |
| Voltage ( p-p ) | Voltage | Current | |
| XFR 7.5-300 | 100 mV | 10 mV | 1600 mA |
| XFR 12-220 | 100 mV | 10 mV | 1200 mA |
| XFR 20-130 | 100 mV | 10 mV | 400 mA |
| XFR 33-85 | 100 mV | 15 mV | 300 mA |
| XFR 40-70 | 150 mV | 15 mV | 200 mA |
| XFR 60-46 | 150 mV | 15 mV | 100 mA |
| XFR 100-28 | 175 mV | 25 mV | 80 mA |
| XFR 150-18 | 200 mV | 25 mV | 40 mA |
| XFR 300-9 | 400 mV | 40 mV | 20 mA |
| XFR 600-4 | 500 mV | 100 mV | 10 mA |
| Output Ratings | ||
| Model | Drift ( 8 hours ) | |
| Voltage ( 0.5% of Vmax ) | Current ( 0.05% of lmax ) | |
| XFR 7.5-300 | 3.75 mV | 150 mA |
| XFR 12-220 | 6 mV | 110 mA |
| XFR 20-130 | 10 mV | 65 mA |
| XFR 33-85 | 16.5 mV | 42.5 mA |
| XFR 40-70 | 20 mV | 35 mA |
| XFR 60-46 | 30 mV | 23 mA |
| XFR 100-28 | 50 mV | 14 mA |
| XFR 150-18 | 75 mV | 9 mA |
| XFR 300-9 | 150 mV | 4.5 mA |
| XFR 600-4 | 300 mV | 2 mA |
| Output Ratings | ||
| Model | Temp Coeffcient | |
| Voltage ( 0.02% of Vmax ºC ) | Current ( 0.03% of Vmax ºC ) | |
| XFR 7.5-300 | 1.5 mV | 90 mA |
| XFR 12-220 | 2.4 mV | 66 mA |
| XFR 20-130 | 4 mV | 39 mA |
| XFR 33-85 | 6.6 mV | 25.5 mA |
| XFR 40-70 | 8 mV | 21 mA |
| XFR 60-46 | 12 mV | 13.8 mA |
| XFR 100-28 | 20 mV | 8.4 mA |
| XFR 150-18 | 30 mV | 5.4 mA |
| XFR 300-9 | 60 mV | 2.7 mA |
| XFR 600-4 | 120 mV | 1.2 mA |
| Output Ratings | ||
| Model | Program Slew Rate | |
| Rise time | Fall time | |
| XFR 7.5-300 | 1.5 mV | 90 mA |
| XFR 12-220 | 100 ms | 100 ms |
| XFR 20-130 | 100 ms | 100 ms |
| XFR 33-85 | 100 ms | 100 ms |
| XFR 40-70 | 100 ms | 100 ms |
| XFR 60-46 | 100 ms | 100 ms |
| XFR 100-28 | 170 ms | 170 ms |
| XFR 150-18 | 170 ms | 170 ms |
| XFR 300-9 | 170 ms | 170 ms |
| XFR 600-4 | 170 ms | 170 ms |
| Output Ratings | ||
| Model | OVP Adjustment Range ( 5% to 110% of Vmax ) |
Efficiency |
| XFR 7.5-300 | 0.375-8.25 V | 80% |
| XFR 12-220 | 0.6-13.2 V | 82% |
| XFR 20-130 | 1-22 V | 85% |
| XFR 33-85 | 1.65-36.6 V | 85% |
| XFR 40-70 | 2-44 V | 87% |
| XFR 60-46 | 3-66 V | 90% |
| XFR 100-28 | 5-110 V | 90% |
| XFR 150-18 | 7.5-165 V | 90% |
| XFR 300-9 | 15-330 V | 91% |
| XFR 600-4 | 30-660 V | 91% |
| Interface Specifications with RS-232 or GPIB Interface Installed | |||
| Model | Program Accuracy | ||
| Voltage ( mV ) | Current ( mA ) | OVP ( mV ) | |
| XFR 7.5-300 | 10+0.12% | 900+0.15% | 40 |
| XFR 12-220 | 75+0.12% | 750+0.15% | 75 |
| XFR 20-130 | 75+0.12% | 500+0.15% | 100 |
| XFR 33-85 | 75+0.3% | 425+0.1% | 175 |
| XFR 40-70 | 75+0.3% | 350+0.15% | 200 |
| XFR 60-46 | 150+0.3% | 250+0.1% | 300 |
| XFR 100-28 | 150+0.35% | 140+0.15% | 500 |
| XFR 150-18 | 225+0.35% | 120+0.1% | 750 |
| XFR 300-9 | 225+0.35% | 80+0.1% | 1500 |
| XFR 600-4 | 300+0.35% | 80+0.1% | 3000 |
| Interface Specifications with RS-232 or GPIB Interface Installed | ||
| Model | Readback Accuracy | |
| Voltage ( mV ) | Current ( mA ) | |
| XFR 7.5-300 | 30+0.12% | 900+0.1% |
| XFR 12-220 | 75+0.12% | 750+0.1% |
| XFR 20-130 | 75+0.2% | 500+0.1% |
| XFR 33-85 | 75+0.3% | 425+0.1% |
| XFR 40-70 | 75+0.3% | 350+0.1% |
| XFR 60-46 | 150+0.35% | 250+0.1% |
| XFR 100-28 | 150+0.35% | 140+0.1% |
| XFR 150-18 | 225+0.35% | 120+0.1% |
| XFR 300-9 | 225+0.35% | 80+0.1% |
| XFR 600-4 | 300+0.35% | 80+0.1% |
