產品精準搜尋

產品介紹

模組化電源供應器
  • Facebook
  • LINE
  • Twitter
  • LinkedIn
AMETEK Power DC Load Module - ELGAR ReFlex 375–750W DC Load Module | 洛克Lockinc
AMETEK Power DC Load Module - ELGAR ReFlex 375–750W DC Load Module | 洛克Lockinc
功能說明

Product Overview

ReFlex Power™ is a high density, modular programmable power system providing DC, AC and electronic load assets all under control of a single controller. It provides a reconfigurable, flexible platform ideal for ATE and production test environments where RFP™ can provide programmable stimulus and bias power as well as programmable loads for the device(s) under test. The EIA 4U high RFP™ mainframe can hold up to 12 single-slot modules or combinations of single, dual and triple slot wide modules to configure (or reconfigure) the system for the particular requirements at hand. The mainframe can support up to 6 kW of output power.

Up to 8 mainframes, potentially up to 95 modules, can be controlled via a single controller. The controller communicates to the individual modules via a high speed proprietary bus protocol, providing very high data rates and a high degree of deterministic control. The RFP™ controller communicates to the host controller via an Ethernet LAN connection designed to be compliant with the LAN Extension for Instrumentation ( ™ ) standard, assuring interoperability and ease of integration. RFP™ system modules can be combined via the controller, permitting the creation of “virtual assets” with the voltage/current combinations required for a particular test regime. Creating “virtual assets” reduces the “logistical tail” and total cost of ownership.

Available power modules include 
  • Single slot, 330 Watt programmable DC supplies
    • 16V, 20.6A
    • 65V, 5.1A
       
  • Dual slot, 1kW programmable DC supplies
    • 33V, 30A
    • 50V, 20A
    • 50V, 25A
    • 120V, 8.3A
    • 450V, 2.3
       
  • Triple slot, 875 VA, single phase, programmable AC supply
    • Dual range: 280V(rms), 3.5A(rms)
    • Dual Range: 140V(rms), 7A(rms)
       
  • Triple slot, 500V, programmable electronic DC loads
    • 15A, 375 Watt
    • 30A, 750 Watt

The mainframe provides internal power distribution, cabling, I/O and power connection and rack mounting for 12-asset slots. The mainframe also supplies the signal and control bus fabric supporting multi-module series/parallel operation, complex triggering, fault I/O and inter-mainframe control infrastructure.

DC Load Modules General Specifications
Physical Size: 3 RFP Slots
Weight 8.2 lbs (375W); 12.9 lbs (750W)
Connectors DC Input and Sense: MS3102R20-24P Remote Programming:
9 pin D-Sub (Mating connector available)
Stability <0.1% of FS after 8 hrs
Temperature Stability <0.05% of FS/°C
Protection Overvoltage: 525V ± 3%
Overcurrent: 20A ± 3% (375W)
40A ± 3% (750W)
Overpower: 19-394W ± 5% (375W)
38 – 788W ± 5% (750W)
Reverse Voltage: -15V ± 1V
Parallel Operation Up to six modules. Must be adjacent.
Noise

30mA (pk-pk), 20 Hz to 20 MHz bandwidth
Programming Response Time 55ms
Input Trigger
Response Time		 ≤5ms
Dynamic Response 
(10 to 90/90 to 10%)		 50μs
Remote Sense 0.75V per source line
Max Float Voltage 500Vdc any input terminal to chassis
Cooling Internal fans, require 110 CFM minimum airflow at
altitude and ambient temperature
Current Mode
Model 375W 750W
Range 0-15A 0-30A
Resolution 0.9mA 1.8mA
Accuracy 0.3% of FS 0.3% of FS
Resistance Mode
Range 1, Resolution 1-99Ω, 1Ω at Current ≥ 1% of FS
Range 2, Resolution 100-1000Ω, 100Ω at Current ≥ 1% of FS
Range 3, Resolution 1000-5000Ω, 1000Ω at Current ≥ 1% of FS
Accuracy

5% of setpoint. Current ≥ 10% of FS
Analog Control
Range 0 to 5V or 0 to 10V = FS
Accuracy 0.3% of FS + digital accuracy
Bandwidth

8kHz @ -3dB
DC Input Ratings
Model 375W 750W
Voltage 500V 500V
Current 15A 30A
Power 375W 750W
Min Voltage, Full Load 3V 3V
Digital Amp Meter
Model 375W 750W
Range 0-15A 0-30A
Resolution 0.9mA 1.8mA
Accuracy 0.3% of FS 0.3% of FS
Digital Volt Meter
Range 0-500V
Resolution 33mV
Accuracy

0.1% of FS
All specifications are subject to change

Manuals
ReFlex Power Operation Manual Rev K - 11/9/2011 (3.64MB)
ReFlex Power Programming Manual Rev J - 11/9/2011 (1.76MB)
Tech Note: Mating Connnectors for Mainframe Rev E - 02/07/09 - 186Kb
Tech Note: Mating Connnectors for Controller Rev F - 02/07/09 - 146Kb
Tech Note: Mating Connnectors for LPDC 16V Rev E - 02/07/09 - 158Kb
Tech Note: Mating Connnectors for LPDC 65V Rev E - 02/07/09 - 153Kb
Tech Note: Mating Connnectors for HPDC 33V / 50V Rev F - 02/07/09 - 94Kb
Tech Note: Mating Connnectors for HPDC 120V Rev X2 - 03/31/09 - 92Kb
Tech Note: Mating Connnectors for HPDC 450V Rev E - 02/07/09 - 108Kb
Tech Note: Mating Connnectors for FPDC Rev E - 02/07/09 - 87Kb
Tech Note: Mating Connnectors for AC Rev D - 02/07/09 - 158Kb
Tech Note: Mating Connnectors for Loads Rev D - 02/07/09 - 99Kb
Tech Note: Fault Protection Groups Rev A - 02/07/09 - 96Kb
Tech Note: Firmware Updates Rev B - 02/07/09 - 421Kb
Quick Reference guide : Reflex Power Network Communication and Output Connections Rev E - 5/6/2010 (244KB)
Data Sheet
ReFlex Power Data Sheet 3/30/2012 (541KB)
Software
AC IVI-COM Driver (2.0.11.0) ¹ 4380277-09 3/26/2012_2.76 Mb
DC IVI-COM Driver (2.0.12.0) ¹ 4380276-10 3/26/2012  3.26 Mb
Loads IVI-COM Driver (2.0.9.0) ¹ 4380278-07 3/26/2012_2.68 Mb
Firmware Update Executable 21.2 Kb
Firmware Update V3.500 2/16/2012 (2.25MB)
ReFlex Power Control & Monitor GUI
- ElgarRAC v2.0.5.0 
- ElgarRDC v2.0.6.0 
- ElgarRLD v2.0.5.0		 02/16/2010 - V1.0.0.2 - 33.7Mb
Loading...
與我們聯絡