產品介紹
首頁 > 產品介紹 > 交直流電源 > 模組化電源供應器
模組化電源供應器
功能說明
Product Overview
ReFlex Power™ is a high density, modular programmable power system providing DC, AC and electronic load assets all under control of a single controller. It provides a reconfigurable, flexible platform ideal for ATE and production test environments where RFP™ can provide programmable stimulus and bias power as well as programmable loads for the device(s) under test. The EIA 4U high RFP™ mainframe can hold up to 12 single-slot modules or combinations of single, dual and triple slot wide modules to configure (or reconfigure) the system for the particular requirements at hand. The mainframe can support up to 6 kW of output power.
Up to 8 mainframes, potentially up to 95 modules, can be controlled via a single controller. The controller communicates to the individual modules via a high speed proprietary bus protocol, providing very high data rates and a high degree of deterministic control. The RFP™ controller communicates to the host controller via an Ethernet LAN connection designed to be compliant with the LAN Extension for Instrumentation ( ™ ) standard, assuring interoperability and ease of integration. RFP™ system modules can be combined via the controller, permitting the creation of “virtual assets” with the voltage/current combinations required for a particular test regime. Creating “virtual assets” reduces the “logistical tail” and total cost of ownership.
Available power modules include
- Single slot, 330 Watt programmable DC supplies
- 16V, 20.6A
- 65V, 5.1A
- Dual slot, 1kW programmable DC supplies
- 33V, 30A
- 50V, 20A
- 50V, 25A
- 120V, 8.3A
- 450V, 2.3
- Triple slot, 875 VA, single phase, programmable AC supply
- Dual range: 280V(rms), 3.5A(rms)
- Dual Range: 140V(rms), 7A(rms)
- Triple slot, 500V, programmable electronic DC loads
- 15A, 375 Watt
- 30A, 750 Watt
The mainframe provides internal power distribution, cabling, I/O and power connection and rack mounting for 12-asset slots. The mainframe also supplies the signal and control bus fabric supporting multi-module series/parallel operation, complex triggering, fault I/O and inter-mainframe control infrastructure.
Key Features
- Near Linear Power Supply
- Modular
- ≥0.95 PFC
- Digital control loop technology
- High Power Density (3.5 watts/cubic inch)
- “Virtual Assets” by:
- Series operation
- Parallel operation
- Combined operation with loads
- Simple integration
|
||||||||||||||||||||||||||
|
|
|||||||||||||||
|
|
|||||||||
|
|
|||||||||
|
|
||||||||||||
|
