產品介紹

TCP0020、TCP2020

Tektronix 交流/直流電流探棒

產品說明

．最多樣的交流/直流及僅交流電流探棒
．量測準確度從 uAs 到 2000 A
．同級最佳頻寬，最大可達 120 MHz
．電流鉗靈敏度低至 1 mA，為同級產品中最佳的電流鉗
．唯一通過第三方安全性認證的產品（UL、CSA、ETL）
．唯一具有裸線電壓評價的產品
．擁有自動量測刻度，在使用時，無需將伏特轉換成安培或手動設定刻度

探棒入門指南 (5.2 MB)

功能說明

機型	機型	最大電流	最小電流	頻寬	上升時間	參考價格(未稅)
TCP0020	TCP0020	直流：20 A 最高 RMS：20 A 峰值電流：100 A	10 mA	50 MHz	< 7 ns	NT$162,000
TCP2020	TCP2020	20 A RMS，100 A 峰值脈波	10 mA	50 MHz	≤ 7 ns	NT$157,000
TCP202A (已停產)	TCP202A	直流：15 A 最高 RMS：15 A 峰值電流：50 A	10 mA	50 MHz	< 7 ns	-已停產

Features & Benefits

Easy-to-Use and Accurate AC/DC Current Measurements
DC to >50 MHz Bandwidth
Core Jaw Diameter of 5 mm (0.2 in.)
Accurately Measures Current Levels as Low as 10 mA per Division
High Accuracy with Typically Less than 1% DC Gain Error
Split-core Construction allows Easy Circuit Connection
Low Noise and DC Drift
TCP0020
- 20 ARMS Maximum Current Capability
- 100 A Peak Pulse Current Capability
- Connects Directly to Oscilloscopes with the TekVPI™ Probe Interface
- Provides Automatic Units Scaling and Readout on the Oscilloscope Display
- One-button Degauss and AutoZero Control for Ease of Use
- Easy Access to Scope-displayed Probe Menu for Probe Setup Control and Operating Status Information
- Remote Control Capability through TekVPI Oscilloscope
TCP2020
- 20 ARMS Maximum Current Capability
- 100 A Peak Pulse Current Capability
- 10 mA/mV Sensitivity
- BNC Output Connects to Most Oscilloscopes and Other Measurement Equipment t;100 k? Termination Required)
- Degauss Button and Thumbwheel for DC Offset Adjustment
- Powered by an AC Adapter
TCP202A(已停產)
- 15 ADC + Peak AC Maximum Current Capability
- 50 A Peak Pulse Current Capability
- Connects Directly to Oscilloscopes with the TekProbe™ Interface
- Provides Automatic Units Scaling and Readout on the Oscilloscope Display
- Degauss Button and Thumbwheel for DC Offset Adjustment
Safety Certified

Applications

Power Supplies
Semiconductor Devices
Power Inverter/Converters
Electronic Ballasts
Industrial/Consumer Electronics
Mobile Communications
Motor Drives
Transportation Systems

TCP0020, TCP2020, TCP202A(已停產)

The TCP0020, TCP2020, and TCP202A are a family of high-performance, easy-to-use AC/DC current probes designed for use with a variety of oscilloscopes. The TCP0020 is designed for direct connection to oscilloscopes with the TekVPI™ probe interface and the TCP202A is designed for direct connection to oscilloscopes with the TekProbe™ probe interface. The TCP2020 is designed for use with any instrument with BNC inputs and >100 kΩ input termination.

These AC/DC current probes provide sufficient performance to support 50 MHz measurement system bandwidth. The TCP0020 and TCP2020 provide a maximum 20 ARMS measurement range, while the TCP202A provides a maximum 15 ADC + Peak ACmeasurement range. These probes also provide excellent accuracy to current levels as low as 10 mA, important for meeting today’s challenging current measurement needs.