產品精準搜尋

產品介紹

Picotest Injector
  • Facebook
  • LINE
  • Twitter
  • LinkedIn
J2161A-Picotest 2-Way Wideband Active Splitter(Impedance) | 洛克Lockinc
J2161A-Picotest 2-Way Wideband Active Splitter(Impedance) | 洛克Lockinc

J2161A

J2161A-Picotest 2-Way Wideband Active Splitter(Impedance)

產品說明
  • J2161A/J2102B enables Gold-Standard 2-port shunt-through Power Distribution Network Impedance measurement on oscilloscopes
  • 100Hz – 500MHz typical measurement bandwidth, Impedances down to 1mohm
  • Works with Tektronix Series 5/6 oscilloscopes with FRA features (requires 5-PWR or 6-PWR software)
解決方案手冊 (512 KB)
手冊下載 (2.1 MB)
功能說明

Now you can perform the “Gold Standard” PDN measurement on the Tektronix Series 6 oscilloscope. The 2-port shunt-through impedance measurement is enabled by the Picotest J2161A Active Splitter, along with either a J2102B Common Mode Transformer or a J2113A Differential Amplifier (for ground loop breaking). The combination of these two injectors (splitter and transformer) allows you to measure low impedances over frequency down to 1mohm covering a bandwidth of 100Hz to over 500MHz. The bandwidth of the measurement is dependent on the scope’s capabilities.
 

What's included:

1. J2161A 2-Way Wideband Active Splitter
2. J2170B High PSRR Power Adapter
3. User Manual
4. 1 Year Warranty


 
規格說明
Specifications
Characteristic Typical
Uncalibrated Insertion Loss < 100MHz 1dB.
>100MHz - 500MHz 3dB
Input Return Loss (typical) < 100MHz < -20dB
>100MHz - 500MHz 12dB
Output Return Loss (typical) < 100MHz < -20dB
>100MHz - 500MHz 12dB
Gain 1
Out to Out Isolation >75 dB (up to 100MHz)
Maximum Input Voltage 2Vpk DC+AC
Temperature Range 0 ~ 50°C
Maximum Altitude 6000 Ft
Absolute Maximum Voltage (input or output) 2.5V pk DC+AC into 50Ohms
Caution: To avoid equipment damage and/or severe injuries or death ensure that the absolute maximum ratings are observed and not exceeded at all times.
 
Loading...
與我們聯絡